Our suction strainers permit full use of available water sources down to 1-1/2″. The nozzle can be adjusted and locked through a 90-degree arc to prevent bending of the hose, allowing strainer to always sit flat at the bottom of the tank. Constructed of rust-free, high-tensile strength aluminum with a convenient carrying handle and a long
High quality 45 mm pressure and suction hose. The hose is made of polyvinyl chloride (PVC) with a high tensile strength hard PVC wire spiral as a pressure support. With a temperature range of -10 °C to 55 °C, an operating pressure of 6 bar and a maximum vacuum pressure of -0.7 bar an ideal hose for irrigation and drainage projects in industry, agriculture and horticulture.
High tensile textile cords with eedded steel helix wires. Tube: NBR handles 40% Aromatics Temperature Range: -20ºC to 121ºC Working Pressure: 5 Bar 3:1 Safety Factor. FUEL-OIL Hose T-605 AA Suction and delivery 10 BAR (150 PSI) TUBE : Black Conductive NBR REINFORCEMENT : High Tensile Textile Cords with eedded steel helix wire
30mtr Coil length. 1.1/4" / 32mm Clear Flexible Wire Reinforced PVC Hose Pipe for Water Air Oil. Also available in 10mtr coil length. Hi-Vac Ducting retains its flexibility at low temperature and has a smooth bore for reduced flow resistance.
Created for both suction and discharge appliions. Available in various lengths to suit requirements. Working pressure up to 2000kpa with a burst pressure safety factor of up to 4:1. Weather and ozone resistant. For advice about your specific requirements and to talk to one of our technical specialists, please call us on (08) 9725 4854.
APPLIION: A short length suction and delivery soft ended hose ideally suited for temporary or permanent water transfer appliions e.g. pump rentals REINFORCEMENT: High tensile textile braid with eedded wire helix. INNER TUBE: Black NR/SBR Blend. COVER: Black NR/SBR Blend. BRANDING: Green layline. TEMPERATURE: -20°C to +80°C ADVANTAGES:
Strainer Suction Mesh Filters Hose Inlet Strainer Stainless Steel Hose Intake Filter Suction Line Strainer. Ready to Ship. high temperatures. The strainer suction are also eco-friendly and safe to use in all conditions. These incredible products are corrosion-resistant, tensile-resistant, and the shape can be made according to your drawings
fuel hose RYLTEC 2200. for hydrocarbons rubber suction. fuel hose. RYLTEC 2200. Inner diameter: 19 mm - 152 mm. Outer diameter: 30 mm - 168 mm. Pressure: 16 bar. Hose for hydrocarbon suction and propulsion, unloading trucks, fuel transfers with a maximum aromatic content of 50%, and oils in return line circuits.
Constructed of high-tensile strength aluminum with a convenient carrying handle and a long-handled anodized aluminum coupling to help you get water flowing in a hurry. 5″ suction strainer -18″ x 13-1/2″ x 12-1/2″ 6″ Suction strainer- 22″ x 16″ x 14″. Add to Compare. Ziamatic QD-600-S.
Constructed of high-tensile strength aluminum with a convenient carrying handle and a long-handled anodized aluminum coupling to help you get water flowing in a hurry. 5″ suction strainer -18″ x 13-1/2″ x 12-1/2″. 6″ Suction strainer- 22″ x 16″ x 14″.
Suction hose DN25 with 2" drum adaptor for EP60, EP140 and EP12/24 PLUS, R1" at one end, with suction filter and backlash valve. Article: 3471286 Tarif-No.: 40092200 Fasteners for High Tensile Conveyor Belt; Belt Cleaners; Lubriion Equipment. Grease Guns; Accessories, Grease Fittings; Fluid Measures, Oil Cans, Funnels ;
Find suction hose ads in our Home & Garden egory from Perth Region, WA. The suction hose kit is equipped with a foot valve and a strainer to prevent the ingress of larger debris. Colour: Green Material: PVC Hose inner diameter: 22 mm Hose outer diameter: 26 mm Length: 10 m Weight: 2.2 kg Threaded connection: 1" Minimum temperature: -10
Suction and Delivery Hoses Are Recommended For: Both suction and delivery of weak acids, alkalis, oil and water, etc. This is a multipurpose hard wall hose, incorporating a twin high tensile wire helix eedded into the carcas of the hose, preventing the hose from kinking. The hose has a 4:1 safety factor on the working pressure. For sizes
Reinforcement: multiple layers of high tensile spiral steel wires, making hose have solid structure and resistant to kink and high pressure. Cover: synthetic rubber, NR, SBR or BR, making hose resistant to abrasion, corrosion, seawater, heat, weather, ozone and aging. Working temperature: 20 °C to 80 °C. The specifiion of flood discharge
These basket strainers are comprised of 1/8’’ holes which efficiently strain water for most centrifugal lawn pumps. Constructed of high tensile stainless steel, these strainers are built to withstand harsh conditions.. 1/8” mesh will only allow passage of particulate that will flow through most pump impellers – greatly reducing the chance of clogging pumps or other devices
9/3/2022· Green lightweight camlock pvc water suction hose is rated for medium duty. Reinforced with high tensile synthetic yarn and steel helix wire.Appliions: General purpose Agricultural Irrigation Construction Camlock fittings (quick connect couplings) allow for quick, secure connections of hoses to tanks or other hoses.
Cover: Black conductive SBR/NR - abrasion and ozone resistant. Appliion: Bulk material suction and delivery. Specially designed for drill cutting suction in mobile drilling rigs. Corrugated construction for maximum flexibility. Constant operation: -30 °C +80 °C (-22 °F +176 °F) ID. (mm)
21/12/2021· SAE 100R4 is the hydraulic suction hose, it is designed to be a textile reinforced hydraulic hose. You can see that the reinforcement of the hydraulic suction hose consists of the spiral steel wire. The inner tube of this suction hose hydraulic hose is manufactured with the Nitrile rubber material, which has excellent oil resistance so that you
High quality 32 mm pressure and suction hose. The hose is made of polyvinyl chloride (PVC) with a high tensile strength hard PVC wire spiral as a pressure support. With a temperature range of -10 °C to 55 °C, an operating pressure of 7.5 bar and a maximum vacuum pressure of -0.7 bar an ideal hose for irrigation and drainage projects in industry, agriculture and horticulture.
REINFORCEMENT: High tensile textile cord with wire helix. INNER TUBE: Black Smooth EPDM. COVER: Blue Smooth EPDM. BRANDING: White layline. TEMPERATURE: -40ºC TO +180ºC. ADVANTAGES: • Suitable for all types of road tankers. • Can …
HOSES RUBBER.au. HOSES RUBBER EXITFLEX® EF630 Black Heavy Duty Air/Water Hose APPLIION: Designed for pneumatic machines tools, such as rock drills and air/water mining appliions. REINFORCEMENT: High tensile braid. INNER TUBE: Black NR/SBR blend. COVER: Black NR/SBR blend. BRANDING: Blue layline. TEMPERATURE: -20°C to +80°C STANDARDS: …
This strong internal fabric can withstand the high tensile load applied to the hose when it is dragged behind an irrigator. Fire Fighting - Fire hose is a high-pressure hose that carries water or other fire retardant to a fire to extinguish it. Due to the nature of its appliion, fire hose requires special construction technique and material to enable it to work effectively under a very …
GREEN SUCTION HOSE – 2″ x 20’ green PVC suction hose with male and water shank couplings; BLUE DISCHARGE HOSE – 2″ x 50’ blue PVC discharge hose with male and water shank couplings; WITH ROUND HOLE STRAINER – 2″ round hole strainer is made of plated carbon steel for rust and corrosion resistant
M405 – MAXFLO Extra H/Duty Petrol & Oil Suct/ Delivery. Appliion: An extra heavy duty petrol and oil suction and discharge hose for higher pressured appliions. Tube: Black NBR Blended Rubber Reinforcement: Dual High Tensile Steel Wire Helix and a High Tensile Synthetic Braid Cover: Black EPDM/NBR Blended Rubber with a Red Stripe. Temp:-20°C to 70°C
You will be much better off to just spend 2 cents a foot and buy new 12.5 hi-tensile wire. - Over-tensioning hi-tensile wire: Hi-tensile wire needs only between 150 to 200 pounds of tension. If you are used to putting up barbed wire, then you would normally put about 300 to 350 pounds of tension on it. So, don''t over tension hi-tensile wire.
